Tuesday, January 17, 2012

10 Most Often Problems Of Blackberry

5 Problems Of Hardware:

1. Trackball Problems: This could mean the trackball would not move, or material loss. Usually this happens because the roller or small pins that exist in dirty or dusty around the trackball.
SOLUTION: You can actually clean themselves of this roller. The trick is to disassemble the trackball device. To clean the four rollers are quite done brushings with two fingers. But remember you must be thorough and very careful when opening the trackball because these devices are very vulnerable. We recommend using tweezers when opening it.

2. Screen Dust: This is a classic problem for a handset. An electronic device that is always carrying around would be so easily affected by dirt.
SOLUTION: How to clean your favorite mobile phone is quite easy. Each unit is usually mounted screws Blackberry that can be open with a screwdriver sized T5 and T6. Keep in mind, you should not force the screw because it can lead to fractures. Do not use paper towels to clean it but wear a soft cloth as it is commonly used to clean eyeglasses.

3 Port USB Loose: This is common if often unplug the USB cable that is connected to the Blackberry by shaking the cable. Indeed at first it seemed difficult at the USB port pull, knowing still new.
SOLUTION: The only way is to replace with new parts.

4 Not Responsive touchscreen Storm: Sometimes touchscreen with SurePress technology is not responding to your wishes correctly. When pressed, the screen's width storm usually feels soft. But there are some cases respond to storm the screen only in certain parts only.
SOLUTION: You need to know that on the Storm there are four small screws at each end implanted in the display. Four screws is what controls the level of tenderness and responsibility to the pressure on the screen. You can actually make your own arrangements of these screws. But of course requires a high level of accuracy as you will deal with items that are small and very vulnerable.

5 Side Section Element Not Work: This usually happens after you replace the Bezel or side bone on the Blackberry. If you notice, the bezel is not just a decoration but a place to put elements such as voice key. USB ports, headphone jack, and others. Maybe the new bezel is not correctly installed so that features are not going well.
SOLUTION: The safest way is to change back to the original bezel. But if you already like with a new bezel, we recommend to check and correct the location of the bezel.

5 Problems Of Software:

1 Email Already In erase But Still There: Email is the delete, but not too lost. There are several causes of this problem. Could be because it does not sync or, a data base error.
SOLUTION: One way to overcome this problem is, after deleting emails from outlook inbox, delete it permanently by pressing the Shift and Delete simultaneously. Can also do it manually by deleting the folder and delete items.

2 Email Can not Login: Sometimes emails do not get into the Inbox. This caused memory. Your Blackberry is full, so that new emails can not enter.
SOLUTION: To fix this we can re-register. Here's how: go to the Main Menu, select Advanced Options, then navigate to the Host Rotating Table - Select Menu - Register Now, and the last Registration Message Sent.

3 Can not Send Email: This can occur because of problems on the GPRS network service.
SOLUTION: First, you can do a soft reset by pressing the ALT + CAP + DELETE simultaneously. Second, perform a hard reset by pressing the reset button located on the back of the handset. check the antenna symbol on your Blackberry. After doing this resets both the symbol of the antenna should have shown the GPRS signal. Try to send an email to yourself.

4 Dead When Will Incoming Call Answering: You must be very upset if you have it, especially if the phone is a very important call or that you've been waiting for.
SOLUTION: The most powerful way to overcome this problem is to repeal Batrei of the handset. Get used to remove Batrei least once a week. Allow approximately five to ten minutes and then insert it again. This is done to refresh the memory Blackberry.

5 Often Nge Blank Screen: this kind of thing often happens on the handset that uses the operating system like a computer.
SOLUTION: Usually trying to do softreset and unplug the memory card if any. if this does not work try to upgrade or downgrade the operating system (OS) Blackberry.

Hopefully Above useful tips for all of us.
Please Follow My Blog. Thanks

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.